high rpm angle grinder Wholesale Price OEM Factory-Rockpower

AG-88504 is a high rpm angle grinder AG-88504. The no-load speed of the Angle mill is between 6000r/min-12000r/min, and the rated speed is 6000 RPM. The speed of the Angle mill is related to the specifications, and different specifications have different speeds. Because different specifications of the Angle grinder installed with different grinding wheel, in order to safety, technical safety requirements of any Angle grinder grinding wheel outer diameter linear speed does not exceed 85M/S, so according to this can be calculated the speed of different specifications of the Angle grinder.

Common models of Angle grinding machines are divided into 100 mm (4 inches), 125 mm (5 inches), 150 mm (6 inches), 180 mm (7 inches) and 230 mm (9 inches) according to the specifications of the accessories used, and the small-size Angle grinding machines used in Europe and the United States are 115 mm.

Angle Grinder AG-88504

Item Name	Parameters
Rated Voltage	220-240V~
Rated Frequency	50/60Hz
Max Wheel Diameter	Φ100mm
Hole Diameter of Wheel	Φ22mm
Rated Input Power	850W/1100W
No-Load Speed	11000/min
Stator Size:	Ф534855H
Rotor Size	Ф321155H

CHL bearings Side switch

GET YOUT QUOTE

Descriptions about Angle Grinder

Angle grinders may be used for removing excess material from a piece. There are many different kinds of discs that are used for various materials and tasks, such as cut-off discs (diamond blade), abrasive grinding discs, grinding stones, sanding discs, wire brush wheels and polishing pads.

The Angle grinder, also known as the grinder or disc grinder, is a type of grinding tool used for cutting and grinding glass steel. Angle grinder is a portable electric tool for cutting and grinding glass steel, mainly used for cutting, grinding and brushing metal and stone.
Common models of Angle grinding machines are divided into 100 mm (4 inches), 125 mm (5 inches), 150 mm (6 inches), 180 mm (7 inches) and 230 mm (9 inches) according to the specifications of the accessories used, and the small-size Angle grinding machines used in Europe and the United States are 115 mm.

Types of Angle Grinder: Angle grinders Compact Angle grinders and large Angle grinders, compact Angle grinders: ultra-light, some with safety rebound switch configuration – to meet the requirements of novice diagonal mill operation; Large Angle grinder: Powerful and suitable for difficult grinding and cutting operations.

The main distinction between the two is that an angle grinder is a handheld, portable tool, whereas a disc grinder is a sturdy piece of machinery. A disc grinder is typically used for precision work on smaller workpieces, whereas an angle grinder is used for rough cutting and grinding.

A cut off tool can only be used for cutting, whereas an angle grinder provides you with cutting, shaping, sharpening, grinding, and other functions. A cut off tool can be easily operated with one hand, while the angle grinder requires both hands.

Angle grinders get their name from the disc’s placement at a right angle to the handle’s axis. A safety guard casing is placed around the grinding discs to protect the worker’s eyes and prevent grinding sparks from striking his face.

Factory Warehouse

Safty Instruction

A recoil is a sudden reaction to a squeezed or stuck spinning wheel, back pad, brush, or any other accessory. Squeezing or hooking causes a rapid stall of the rotating attachment, which in turn causes the uncontrolled power tool to be forced in the opposite direction to the rotation of the attachment at the restraint point. For the previous ample, if the grinding wheel is snagged or pinched by the workpiece, the edge of the grinding wheel entering the pinch point may penetrate deep into the surface of the material, causing the grinding wheel to crawl out or kick out. The wheel can jump towards or away from the operator, depending on the direction the wheel is moving at the squeeze point. Under these conditions, the grinding wheel may also break. Kickbacks are the result of misuse of power tools and/or incorrect operating procedures or conditions and can be avoided by taking the appropriate precautions given below.
a) Firmly hold the power tool and adjust the position of the body and arms to resist the recoil force. Always use an auxiliary handle (if provided) to maximize recoil or torque reaction during start-up. If proper precautions are taken, the operator can control the torque reaction force or recoil force.
b) Do not put your hands near rotating accessories. Accessories may bounce off your hand.
c) If recoil occurs, do not place your body in an area where the power tool will move. The recoil will push the tool in the opposite direction to the wheel movement at the hook point.
d) Be especially careful when handling corners, sharp edges, etc. Avoid bouncing and snagging attachments. Corners, sharp edges, or bounces can easily snag rotating accessories and cause loss of control or recoil.
e) Do not install chainsaw woodcarving blades or serrated saw blades. This blade can cause frequent recoil and loss of control.